자료

Stainless Steel (C465)

Stainless Steel C465 is an age-hardenable chromium-nickel based steel alloy that offers excellent strength, fracture toughness, and corrosion resistance. This material is an ideal choice for the aerospace, maritime, and medical industries, as well as other industrial applications where high strength and hardness are required, such as injection molds, drilling machines, and other tools.

Talk to our team

Close-up view of part of a lightweight, 3D-printed, stainless steel part

기술 사양

Maximum part dimensions	250 x 250 x 305 mm
Standard accuracy	Better than or equal to the industry standards: DCTG 6 of DIN EN ISO 8062-3 for dimensions between 0.5 and 30 mm DCTG 8 of DIN EN ISO 8062-3 for dimensions between 30 and 400 mm DIN ISO 2768-1 c (coarse) for dimensions between 0.5 mm and 400 mm See design guidelines for more information on standard accuracy.
Layer thickness	0.04 mm
Minimum wall thickness	Standard: 1 mm, Performance: 0.5 mm
Minimum detail size	0.5 mm
Interlocking or moving parts	No
Internal channels	Yes
Surface structure	Rough surface

등급

표준 또는 퍼포먼스 등급을 선택하여 모든 프로젝트에서 퍼포먼스와 효율성의 균형을 유지합니다.

Standard

The all-rounder, where it’s all about technology:

Ideal for prototypes and simple end-parts
Form-, fit-, and function-testing
Strength and density similar to cast parts
Industry-standard quality requirements

Performance

The specialist, for complex production:

Ideal for complex metal parts designed for AM
Preferred for applications in demanding environments
Suited for series production
Higher strength and density than casting
Specialized quality test reports available to your specification

데이터시트

매개 변수	표준 등급	퍼포먼스 등급	표준	구성 단위	방법
Density -	>7.8	g/cm³	-
Relative density -	>99	%	-
Tensile strength DIN EN2002-1	>1,330	MPa	DIN EN2002-1
Yield strength DIN EN2002-1	>1,175	MPa	DIN EN2002-1
Elastic modulus DIN EN2002-1	~160	GPa	DIN EN2002-1
Elongation at break DIN EN2002-1	>9	%	DIN EN2002-1
Roughness R_a ISO 4287 / AITM 1-00070	<12	µm	ISO 4287 / AITM 1-00070
Roughness R_z ISO 4287 / AITM 1-00070	<70	µm	ISO 4287 / AITM 1-00070
Hardness DIN EN ISO 6507-1:2018-07 HV10	>450	HV	DIN EN ISO 6507-1:2018-07 HV10

Actual values may vary with build conditions.

Strong tensions due to part geometry may distort parts, potentially leading to greater deviation in values. Values for surface roughness depend on the orientation of the surface; downward-facing surfaces and surfaces with support will be rougher.

These values show the material characteristics with additional stress relief heat treatment. Extra heat treatment steps, cryogenic treatment, or aging for even higher mechanical properties may be possible, e.g. for serial-produced parts.

Please get in touch with our team for more information.

PDF로 다운로드

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Supports removed

Corundum blasted (matte)