자료

PE/PP-like Polyurethanes

Vacuum-cast PE-/PP-like polyurethanes resemble injection-molded polyethylene (PE) and polypropylene (PP). Tough and lightweight, they are ideal for producing high-quality prototypes or small series of end-use parts. Our wide range offers a choice of properties, with various finishes available. For use with silicone molds.

Talk to our team

Black skateboard vacuum casted using PE/PP-like polyurethane

기술 사양

Maximum part dimensions	1,900 x 900 x 750 mm (maximum part volume: 10 liters)
Standard accuracy	±0.3% (with a lower limit on ±0.3 mm on dimensions smaller than 100 mm)
Layer thickness	0.1 mm for master model
Minimum wall thickness	0.75 – 1.5 mm depending on the material and geometry
Minimum detail size	0.5 mm depending on complexity and finishing degree
Interlocking or moving parts	No
Internal channels	No
Surface structure	High-quality surface, comparable to injection molding

데이터시트

선호하는 재료를 선택하십시오:

매개 변수	가치	구성 단위	방법
Density ISO 2781	1.08	g/cm³	ISO 2781
Hardness at 23°C ISO 868	64 – 67	Shore D	ISO 868
Hardness at 80°C ISO 868	-	Shore D	ISO 868
Tensile strength ISO 527	27	MPa	ISO 527
Tensile modulus ISO 527	530	MPa	ISO 527
Bending strength ISO 178	28	MPa	ISO 178
Bending modulus ISO 178	450	MPa	ISO 178
Elongation at break ISO 527	120	%	ISO 527
Tear strength ISO 34	94	kN/m	ISO 34
Impact strength ISO 179/1eU, Charpy, ISO 180 Izod	Unbreakable	kJ/m²	ISO 179/1eU, Charpy, ISO 180 Izod
Glass transition temperature ISO 11357	100	°C	ISO 11357
Heat deflection temperature ISO 75 Ae	-	°C	ISO 75 Ae
Color -	Beige / Dark Beige		-
Colorability in mass -	+	-/+/++/+++	-
Thermoplastic similarity -	PE		-

Actual values may vary based on casting conditions, including factors such as the part's geometry, design, and orientation within the mold

Please get in touch with our team for more information and guidance

PDF로 다운로드

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Basic finish