カラー3Dプリンタ向けエラーデータをラッピング機能で修正する方法

動画をすべて見る時間がない場合は、ご興味のあるトピックまでお進みください。以下のタイムスタンプをご覧ください。

• Find shrinkwrap 0:46
• Shrinkwrap settings 0:52
• Global/local shrinkwrap 1:26
• Apply & result 1:48

1. Select your colored part(s)
   1. If you’d like to shrinkwrap locally, use the marking tools to mark the region.
2. Go to the Fix ribbon >> Shrinkwrap Part.
   1. If you’d like to shrinkwrap locally, switch to the Local tab.
3. Determine the parameters for ‘shrinkwrapping’:
   1. Sample interval is the smallest size of detail that will be preserved.
   2. Gap fill will determine the minimum gap size that will not be bridged during ‘shrinkwrapping’.
   3. When organic shape is enabled, the algorithm tries to anticipate the original geometry as an organic shape with curved features.
   4. Add extra thickness can be used to prevent disappearance of thin walls.
4. Once your settings are ready, click on Apply.