資料

Xtreme

Xtreme is a general-purpose material with high impact strength, high elongation at break, and excellent surface quality. With properties close to CNC-machined polypropylene and ABS, Xtreme is ideal for functional prototyping, snap-fit assemblies, and for replacing CNC machined parts. Its good surface quality also makes it suitable for finished models with a high level of detail.

Get an instant quote

Talk to our team

Angled view of a gauge 3D-printed in the Xtreme material

技術仕様

Maximum part dimensions	480 x 480 x 560 mm
Standard accuracy	±0.2% (with a lower limit of ±0.2 mm)
Layer thickness	0.1 mm
Minimum wall thickness	1 – 3 mm depending on part dimensions
Minimum detail size	0.5 mm
Interlocking or moving parts	No
Internal channels	Yes, but support structures may remain inside channels
Surface structure	Smooth surface with visible building layers; gray material

データシート

パラメーター	価値	単位	方法
Density -	1.19	g/cm³	-
Tensile strength ASTM D638	41	MPa	ASTM D638
Tensile modulus ASTM D638	1,980	MPa	ASTM D638
Flexural modulus ASTM D790	2,070	MPa	ASTM D790
Impact strength ASTM D256 (Notched, Izod)	52	J/m	ASTM D256 (Notched, Izod)
Elongation at break ASTM D638	22	%	ASTM D638
Heat deflection temperature ASTM D648 (@1.82 MPa)	54	°C	ASTM D648 (@1.82 MPa)

Actual values may vary with build conditions and in relation to the part’s geometry and orientation.

Please get in touch with our team for more information and guidance.

PDFをダウンロードする

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Basic finish