資料

Rubber-like Polyurethanes

Vacuum casting with rubber-like polyurethanes and silicone molds is a fast, cost-effective way to produce high-quality prototypes or small series of end-use parts such as grips, seals, and non-slip surfaces. Our wide range of polyurethanes offers a choice of properties and finishes, making it possible to select the material that is closest to the original or end product. 

Talk to our team

Close-up of a black, textured ski pole handle vacuum casted in polyurethane.

技術仕様

Maximum part dimensions

1,900 x 900 x 750 mm (maximum part volume: 10 liters)

Standard accuracy

±0.3% (with a lower limit on ±0.3 mm on dimensions smaller than 100 mm)

Layer thickness

0.1 mm for master model

Minimum wall thickness

0.75 – 1.5 mm depending on the material and geometry

Minimum detail size

0.5 mm depending on complexity and finishing degree

Interlocking or moving parts

No

Internal channels

No

Surface structure

High-quality surface, comparable to injection molding

データシート

ご希望材料をお選びください：
パラメーター価値単位

Density

ISO 2781		1.02

g/cm³

Hardness at 23°C

ISO 868		63

Shore A

Tensile strength

ISO 37		3

MPa

Tear strength

ISO 37		24

KPa

Elongation at break

ISO 37		1,000

%

Color

-		Light amber


Colorability in mass

-		+

-/+/++/+++

Max operating temperature

-		80

°C

Actual values may vary based on casting conditions, including factors such as the part's geometry, design, and orientation within the mold


Please get in touch with our team for more information and guidance

PDFをダウンロードする

Finishing degrees

The right finish can transform your print into a product. Explore the post-production finishes we offer for this material. If you have any questions or special requests, get in touch with us.

Get in touch

Would you like to ask a question or start working on a project? We’d love to hear from you.

Talk to our team

Icons of two people